No Drying Double Roller Potash Fertilizer Extrusion Granulation
Machine
The series of extrusion granulator drum type, its working principle
is: motor driven belts, pulleys, through a reduction gear to a
drive shaft, and synchronized by the open passive gear shaft, in
one and the same working direction. Material was added from the
hopper, by roll forming, release granulation; and crushing the ball
transferred to the sieve chamber through a chain, the finished
product (ball) was sieved and separated and then mixed back with
the new material and re-granulated.
Technical Parameters
| Model | DZJ-I 1.0 | DZJ-I 2.0 | DZJ-I3.0 | DZJ-I 4.0 | DZJ-II 1.0 | DZJ-II 2.0 |
| Capacity | 1-1.5 | 1.5-2.5 | 2.5-3.5 | 3.5-4.5 | 1-2 | 1.5-2.5 |
| Power | 15Kw | 18.5Kw | 30Kw | 45Kw | 15Kw | 18.5Kw |
| Press Roller | Φ150×22O | Φ150×30O | Φ186×30O | Φ300×30O | Φ150×22O | Φ150×30O |
| Feed Size | 0.5mm | 0.5mm | 0.5mm | 0.5mm | 0.5mm | 0.5mm |
| Product Size | Φ2.5~Φ10 | Φ2.5~Φ10 | Φ2.5~Φ20 | Φ2.5~Φ20 | Φ2.5~Φ10 | Φ2.5~Φ10 |
| Speed Reducer | ZQH350 | ZQH400 | ZQH400 | ZQH500 | | |
| Material Mositure | 2%~5% | 2%~5% | 2%~5% | 2%~5% | 2%~5% | 2%~5% |
Granule Strength and Apperance Type:
Shape of finished products | oval, irregular, wheat shaped, etc., can also be customized
according to customer requirements. |
Material moisture requirement | not more than 10% |
The rate of ball formation | 95% |
Output | 1-4t/h ( can combine multiple granulators work together to increase
output, see below technical process chart). |
Granule size | 3-8mm (popular market granule diameter: 2.8-4mm) |
Product Introduction
Motor driven pulley, a belt through a reduction gear to a pair of
two bodies with high pressure roller for relative sliding mode
shell work.
DZJ-I extruder has two rollers, which interact split by the action
of one pair of gears.
DZJ-II type two roll extruder directly driven by two dedicated
output shaft gear, to achieve the purpose of the extrusion.
Production process, the raw material into the hopper, by a high
pressure roller press molding body. After releasing the flow of
crushed material a lower portion shaped rollers.
Break Dynamic formed by active pressing roller chain drive sprocket
driven by one pair of crushing rollers relative movement.
After crushing and screening finished granules in the working
chamber, through the screen to the discharge port outside the
machine.
