Rotary Drum Granulator For Compound Fertilizer Granules Making
Machine
Working principle of drum granulator
The series of works drum granulator are: the main motor driven belt
and pulley, the drive shaft through the speed reducer, and by
working with the shaft opening and the large gear teeth fixed to
the body mounted on the gear. Material from the feed end by feed
barrel. By the action of an internal structure of the barrel,
granulated, and finally out through the outlet. With the continuous
rotation of materials continue to enter granulator to achieve mass
production.
This machine is developed according to the construction company
personnel experience a new generation of drum granulator. The
machine has a beautiful appearance, simple operation, low energy
consumption, long service life, uniform drying, easy to maintain,
is the most advanced domestic granulation equipment. The product is
suitable for cold, hot particles and high, medium and low
concentrations of fertilizer production scale.
Introduction of drum granulator
This machine is the staff I have many years experience in the
production of fertilizer developed a new generation drum
granulator. The machine has a beautiful appearance, simple
operation, low power consumption, long life, uniform drying, and
convenient maintenance. It is more advanced granulation equipment.
Suitable for hot and cold granulation, high, medium and low
concentrations of fertilizer of large-scale production. In
addition, the product is now widely distributed around the world.
Equipment Maintenance
1, bearing bear the full load of the machine, so good lubrication
of the bearing life of a great relationship. It directly affects
the life of the machine and the operation rate, therefore, required
oil must be clean, seal must be good. The main area oiling rotary
bearings, roller bearings, all the gears, the movable bearing,
sliding surfaces.
2, the newly installed tire easy loosened must always check.
3, pay attention to various parts of the machine is working
properly.
4, pay attention to the degree of wear of wearing parts, and always
pay attention to replacement of worn parts.
5, the bottom surface of the active device put away, and then
remove the dust prevents the machine events encountered unbreakable
material bearing on the chassis moves, causing serious accidents.
6. The bearing oil temperature rise should stop immediately check
the reason to eliminate.
7, rotation of the gear in operation, if a crash, should be stopped
and then immediately checked.
Parameter of drum granulator
| Model | ZG1.6*6 | ZG1.8*7 |
| Inner dia | 1.6m | 1.8m |
| Length | 6m | 7m |
| Speed | 11.5r/min | 11.5r/min |
| Power | 11kw | 15kw |
| Capacity | 5-8t/h | 8-10t/h |
Picture of drum granulator
